ugr|dual
12.03.2004, 10:44
Specifications:
MacDev Cyborg FAQ
Stats
Weight: 1.05Kg.. about 2lbs 2oz with Matchstick barrel and Gladiator 04 regulator
Dimensions: 9.25" long w/o the barrel, 8.66" high (no air source attached), 1.18" wide.
Eye Type: Breakbeam
Eye Modes: Force (will not fire unless beam is broken), Simulate (??), Off (Eyes are disabled)
Trigger Checks: 12 million per second
Rate of Fire: Up to 30 balls per second
Operating Pressure: 200psi
LPR pressure: 50psi
LCD Display: No
Battery Type: Replacable 9v
Efficiency: On Par to Excellent (1800+ on a 68/4500)
Price: $980
Colors (front to back fades): Black->Blue, Black->Red, Black->Orange, Black->Yellow
Valve: MacDev Red
LPR: MacDev Sonic
Feedneck threads: AKA (Viking/Excal)
What grips will fit on the Cyborg? (Source)
Your best bet is to get Matrix Dye Sticky 3's, though MacDev should be making their own grips in the future.
How do I adjust my Gladiator's pressure? (Source)
'03 Gladiator: Turn the screw in to increase pressure, out to decrease pressure.
'04 Gladiator: Turn the screw out to increase pressure, in to decrease pressure.
The eyes on my Cyborg won't work... it never lets me fire (Source)
Generally this is caused by sunlight getting past the eye cover causing the receiver half of the eye to think there is still a ball in place. This can be solved by putting a small o-ring on the back of the eye (available through MacDev) or coating the back of the eyes in either black epoxy or liquid electrical tape to prevent light from getting to the back of the eyes.
What is involved in maintaining the Cyborg? (Source)
Basically, lube the ram with dow 33/55 and rebuild the reg (Gladiator '04) every 10,000 shots. Relubing the ram should take less than 5 minutes and requires no tools.
I'm having problems with my Halo on my Cyborg (Source)
The detents may be too tight. Unscrew your detents a 1/4 turn each until it works.
snipped from: Evil Dead
MacDev Cyborg FAQ
Stats
Weight: 1.05Kg.. about 2lbs 2oz with Matchstick barrel and Gladiator 04 regulator
Dimensions: 9.25" long w/o the barrel, 8.66" high (no air source attached), 1.18" wide.
Eye Type: Breakbeam
Eye Modes: Force (will not fire unless beam is broken), Simulate (??), Off (Eyes are disabled)
Trigger Checks: 12 million per second
Rate of Fire: Up to 30 balls per second
Operating Pressure: 200psi
LPR pressure: 50psi
LCD Display: No
Battery Type: Replacable 9v
Efficiency: On Par to Excellent (1800+ on a 68/4500)
Price: $980
Colors (front to back fades): Black->Blue, Black->Red, Black->Orange, Black->Yellow
Valve: MacDev Red
LPR: MacDev Sonic
Feedneck threads: AKA (Viking/Excal)
What grips will fit on the Cyborg? (Source)
Your best bet is to get Matrix Dye Sticky 3's, though MacDev should be making their own grips in the future.
How do I adjust my Gladiator's pressure? (Source)
'03 Gladiator: Turn the screw in to increase pressure, out to decrease pressure.
'04 Gladiator: Turn the screw out to increase pressure, in to decrease pressure.
The eyes on my Cyborg won't work... it never lets me fire (Source)
Generally this is caused by sunlight getting past the eye cover causing the receiver half of the eye to think there is still a ball in place. This can be solved by putting a small o-ring on the back of the eye (available through MacDev) or coating the back of the eyes in either black epoxy or liquid electrical tape to prevent light from getting to the back of the eyes.
What is involved in maintaining the Cyborg? (Source)
Basically, lube the ram with dow 33/55 and rebuild the reg (Gladiator '04) every 10,000 shots. Relubing the ram should take less than 5 minutes and requires no tools.
I'm having problems with my Halo on my Cyborg (Source)
The detents may be too tight. Unscrew your detents a 1/4 turn each until it works.
snipped from: Evil Dead