PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : IR3 Standardlauf


ugr|dual
02.05.2002, 16:27
welchen durchmesser hat der standardlauf der IR3?

( ist das immer noch der gleiche jacko mit step bore wie anno dazumal.. ? )

fierce
02.05.2002, 16:47
Taken from PGI's Test of the Infinity Series Barrel:

The Infinity Series barrel from WDP, formerly known as the Jacko Series, is somewhat of an original in the barrel technology field. The Infinity carries on from where the Jacko left off and is still the standard affair found on every new Angel LCD. The Infinity is unique as it is the only step-bore barrel, normally referred to as a two-piece, constructed from a single piece of aluminum extrusion (posh word for a molded lump of metal). So externally it looks like a standard straight-bore barrel, yet inside there is the distinctive two-piece design of a tight, accelerating back section and a wider, guiding front section. The obvious benefit of machining it from a single piece of metal is that you should get much better, and repeatable, alignment between back and front bores. And of course, they can't fall in half!

The latest version of the Infinity really looks the nuts, with its sleek, curvy lines and stylish logo; if you take into account the fact that it will come color coded to whatever Angel you buy, the thing doesn't look anything like your average stock tube. It's far more closely aligned with the custom ranks.

After shooting the original Jacko for years, we have to say that they are without doubt one of the best tubes available. There are only two problems with the Infinity Series barrel: firstly, it is only available for the Angel these days, so most Cocker, Shocker, Mag and other marker users will never get to savor the pleasure. And secondly, by being a standard feature on the Angel, it will be dismissed to the bin or the bottom of the gun bag without even firing a ball. And that is a real shame, as this is one of the very few, if not the only, stock barrel that really performs as well as the best custom tubes out there.

fierce
02.05.2002, 16:50
Am Anfang .687 und im zweiten Bereich des Laufs .700.

ugr|dual
02.05.2002, 17:37
aha.. die waren früher (lcd 2000) mal .688, kann das sein?

anyway prima, ein guter mittlerer lauf. passt ganz gut.

fierce
02.05.2002, 17:42
Original geschrieben von ugr
aha.. die waren früher (lcd 2000) mal .688, kann das sein?

.687