sh0rt
10.06.2003, 05:49
Einfach mal so:
:doubt:
Finally have eye on gun and working great...read more here
ok first please try not to ask to many questions cause these will be at Chicago PSP and you can see a working one there....we will be taking preorders but the prototype is a bit crude....we just wanted you to see the inner workings and the rest will be after preorders are in.
first the basics
switch 1 and 2 adjust the timing...settings are as follows:
1 off / 2 off lowest forward pulse
1 on / 2 off 2nd lowest forward pulse
1 off / 2 on 2nd highest forward pulse
1 on / 2 on highest forward pulse
note - when using the eye there is no limit on bps
switch 3 and 4 adjust the ROF when eye is off...me might change some things on this
3 on / 4 off 12bps (revy setting)
3 off / 4 on 15 bps (egg 2 setting)
3 on / 4 on 22 bps (halo setting)
if switched 3 and 4 are both off the marker will be in tournement mode
some of the things for the ROF switched will change for the better
to program fire modes
make sure gun is off
hold trigger down and turn gun on
tap trigger once and then wait
now u can tap the trigger diff # of times for diff modes
tap 1 time for semi auto
tap 2 times for turbo
tap 3 times for auto response
tap 4 times for full auto
the breech will have the eye in it and it will automatically turn on when u turn the gun on....to turn it off push the button once....to turn the gun off hold the button for 4 seconds
the breech wires will run straight down into the fram where there will be a diconnection point right before it enters the fram so you may take off your breech at anytime.....you put back the breech which will slide back on making the connectors push together.
the eye covers are simple and will stay on your breech when removing the breech.
any good questions i can answer and all others can wait till june 23
i will try to get pics up asap of the chip and wiring but the eye covers are not done yet so i wont have pics of them
full kit will cost $150 with installation....deluxe kit will cost $185 which includes an already milled breach our style with angel ball detents...we shaved the breech down so it weighs half the weight it did before.
thanks
tez
www.RoughneckPaintball.com
its like both
we have a delay for the ball to drop but it still needs to see the ball as well.....so if it doesnt see the ball if wont fire but when it does there is a delay so the ball has full time to drop......cause if it sees the begining of the ball and fires it will pinch it and breack in the breech.....we have a half of a millisecond delay so the ball can fully be in the breech
it has 2 eyes rather than one like the imps......the guy who first made the classic timmy's is the one making our eyes.....he also makes the gabriel boards and eyes for angels.
so basically since he is doing them he has designed to be like the timmy eyes cause they have always worked great on those guns and they see all paint colors unlike some eyes.
good question by the way
http://www.exarin.com/
:doubt:
Finally have eye on gun and working great...read more here
ok first please try not to ask to many questions cause these will be at Chicago PSP and you can see a working one there....we will be taking preorders but the prototype is a bit crude....we just wanted you to see the inner workings and the rest will be after preorders are in.
first the basics
switch 1 and 2 adjust the timing...settings are as follows:
1 off / 2 off lowest forward pulse
1 on / 2 off 2nd lowest forward pulse
1 off / 2 on 2nd highest forward pulse
1 on / 2 on highest forward pulse
note - when using the eye there is no limit on bps
switch 3 and 4 adjust the ROF when eye is off...me might change some things on this
3 on / 4 off 12bps (revy setting)
3 off / 4 on 15 bps (egg 2 setting)
3 on / 4 on 22 bps (halo setting)
if switched 3 and 4 are both off the marker will be in tournement mode
some of the things for the ROF switched will change for the better
to program fire modes
make sure gun is off
hold trigger down and turn gun on
tap trigger once and then wait
now u can tap the trigger diff # of times for diff modes
tap 1 time for semi auto
tap 2 times for turbo
tap 3 times for auto response
tap 4 times for full auto
the breech will have the eye in it and it will automatically turn on when u turn the gun on....to turn it off push the button once....to turn the gun off hold the button for 4 seconds
the breech wires will run straight down into the fram where there will be a diconnection point right before it enters the fram so you may take off your breech at anytime.....you put back the breech which will slide back on making the connectors push together.
the eye covers are simple and will stay on your breech when removing the breech.
any good questions i can answer and all others can wait till june 23
i will try to get pics up asap of the chip and wiring but the eye covers are not done yet so i wont have pics of them
full kit will cost $150 with installation....deluxe kit will cost $185 which includes an already milled breach our style with angel ball detents...we shaved the breech down so it weighs half the weight it did before.
thanks
tez
www.RoughneckPaintball.com
its like both
we have a delay for the ball to drop but it still needs to see the ball as well.....so if it doesnt see the ball if wont fire but when it does there is a delay so the ball has full time to drop......cause if it sees the begining of the ball and fires it will pinch it and breack in the breech.....we have a half of a millisecond delay so the ball can fully be in the breech
it has 2 eyes rather than one like the imps......the guy who first made the classic timmy's is the one making our eyes.....he also makes the gabriel boards and eyes for angels.
so basically since he is doing them he has designed to be like the timmy eyes cause they have always worked great on those guns and they see all paint colors unlike some eyes.
good question by the way
http://www.exarin.com/